Trang: 34
Tập 27, số 13 2017
Đánh giá hiệu quả khử trùng của hóa chất sử dụng tại Trung tâm nghiên cứu sản xuất vắc xin và sinh phẩm Y tế
Evaluating the disinfection ability of sanitary chemical used in Polyvac
Tác giả: Phạm Anh Thư, Ngô Thu Hường, Nguyễn Đăng Hiền, Nguyễn Thúy Hường, Ngô Tiến Thọ
Tóm tắt:
Đánh giá hiệu quả khử trùng của hóa chất vệ sinh được thực hiện tại Trung tâm nghiên cứu sản xuất
vắc xin và sinh phẩm y tế (POLYVAC) nhằm kiểm tra khả năng diệt khuẩn, thời gian tiếp xúc tối ưu
giữa hóa chất vệ sinh và bề mặt cần làm sạch. Quy trình được thực hiện với hóa chất vệ sinh Presept
(của hãng Gohnson&Gohnson – Mỹ) và cồn 70 độ vô trùng do Polyvac tự sản xuất. Các chủng vi khuẩn
thử thách gồm: Candida albicans, Micrococcus luteus, Bacillus subtilis, Aspergillus niger, Sphingomonas
paucimobillis. Vật liệu thử thách mô phỏng các vật liệu, thiết bị trong nhà xưởng. Nghiên cứu cho thấy, hóa
chất vệ sinh sử dụng tại POLYVAC có thể diệt được hầu hết các chủng vi khuẩn thử thách ở các điều kiện
tối ưu và điều kiện tối thiểu ở các thời điểm tiếp xúc 1 phút, 3 phút, 5 phút với Presept và thời điểm tiếp xúc
1 phút, 3 phút với cồn vô trùng 70 độ. Do vậy, cần tìm một loại hóa chất vệ sinh khác sử dụng luân phiên
với Presept, tăng thời gian tiếp xúc giữa hóa chất vệ sinh với bề mặt vật liệu để tăng hiệu quả diệt khuẩn.
Sử dụng các phương pháp khử trùng khác: xông formalin, chiếu tia UV, kiểm soát nhiệt độ; độ ẩm phòng
sạch để hạn chế sự phát triển của vi sinh vật.
Summary:
Evaluating the disinfection ability of sanitary chemical in Center for Research and Production of Vaccine and Biological (POLYVAC) to check the ability of disinfection, optimal contact time between sanitary chemicals and cleaned surfaces needs cleaning (challenging material surface). It had been done with Presept (Gohnson&Gohnson – America) and 70-degree sterilized alcohol (POLYVAC) are enrolled in the study. Microorganism strains was used including Candida albicans, Micrococcus luteus, Bacillus subtilis, Aspergillus niger, Sphingomonas paucimobillis supplied by ATCC. The epoxy floor, glass, latex, silicone, stainless steel are challenging materials used for research. The result showed that the chemicals used in POLYVAC can kill almost bacterial strains at optimal and minimum condition at certain time of exposure. Therefore, another type of cleaning chemicals should be used alternately with Presept, increasing the contact tiem between the sanitizer and the material surface to increase the bactericidal efficiency. Using other fumigation methods such as formalin injection, UV ray. Controlling clean room’s temparature and humidity to limit the growth of microorganism
Từ khóa:
khả năng khử trùng, presept, cồn vô trùng 70 độ, Polyvac
Keywords:
disinfection ability, presept, sterile alcohol, Polyvac
File nội dung:
o171334.pdf
Tải file: